Danfoss VLT AQUA Drive FC 202

e30bu184.11
-XDL.1
-XD4.1
-XD11.1
8
9
10
11
R
TS
-XD4.3
-XD11.3
-XDL.1
2
3
4
6
7
-XD4.4
5
L1R
L3T
L2S
-XD4.1
1
Illustration 38: Split Shipment Electrical Connections (Input Power Options Cabinet + E6h Drive Cabinet)
1
Cabinet heater supply harness to input lter cabinet
2
DC-link harness to fan supply to input lter cabinet
3
Thermal protection wiring harness in the input lter
cabinet
4
PHF contactor 1 supply harness to PHF cabinet (only
with PHF option)
5
PHF contactor 2 supply harness to PHF cabinet (only
with PHF option)
6
Mains cables R, S, T to input terminals (R/S/T) in the
input lter cabinet
7
Mains cables (L1R/L2S/L3T) to output terminals
(L1R/L2S/L3T) in the input lter cabinet
8
DC-link harness to fan supply in output lter cabinet
9
Cabinet heater supply harness to output lter cabi-
net
10
Available terminal connections
11
Thermal protection wiring harness to output lter
cabinet
AQ262141056213en-000201 / 130R0882 | 67Danfoss A/S © 2020.09
Electrical Installation
VLT® AQUA Drive FC 202
Operating Guide