Danfoss VLT AutomationDrive FC 300 Series Design Guide

FC 300 Design Guide
How to Program
15-63 Option Serial No
Function:
Shows the option slot A serial number.
15-70 Option in Slot A
Function:
Shows the type code string for the options (CXXXX
if no opti on) and the translation i.e. "No option".
15-71 Slot A Option SW Version
Function:
Shows the option slot C software version.
15-72 Option in Slot B
Function:
Shows the option slot C ordering number.
15-73 Slot B Option SW Version
Function:
Shows the option slot C serial number.
15-74 Option in Slot C
Function:
Shows the typecode string for the options (CXXXX
if no option) and the translation i.e. No option.
15-75 Slot C Option SW V er sion
Function:
Shows the type code string for the option (DX if no
option) and the translation i.e. "No option".
" 15-9* Param eter Info
15-92 Defin ed Para meters
Array [1000]
Range:
0 - 99 99
*
0
Function:
Cont
ains a list of a ll defined parameters in the
drive. T h e list ends with 0.
15-93 Modified Parameters
Array [1000]
Range:
0 - 9 999
*
0
Function:
Contains a list of the parameters that are changed
compared to default setting. The list ends with
0.The list is updated regularly, so a change might
not be reflected until after 30s.
15-99 Parameter Metadata
Array [23]
Option:
0 - 9 999
*
0
Function:
For use by MCT10.
*
default setting ()display text []value for use in communication via serial communication port
213
MG.33.B
3.22 - VLT is a registered Danfoss trademark

Danfoss VLT AutomationDrive FC 300 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300 Series
Category	DC Drives
Language	English