Figure 3.15 Select Unit and Conversion from
Pressure
Figure 3.16 Select Fixed or Floating Setpoint
Figure 3.17 Set Setpoint
Figure 3.18 Set High/Low Limit for Setpoint
Figure 3.19 Set Cut Out/In Value
Figure 3.20 Choose Pack Control Set-up
Figure 3.21 Set Number of Compressors in Pack
Figure 3.22 Info: Connect Accordingly
Start-up and Functional Tes...
Instruction Manual
MG16E222 Danfoss A/S © Rev. 2014-02-10 All rights reserved. 35
3 3
To Next Page
Loading...
