1.6 Safety
Frequency converters contain high-voltage components
and have the potential for fatal injury if handled
improperly. Only qualied personnel are allowed to install
and operate the equipment. Do not attempt repair work
without rst removing power from the frequency converter
and waiting the designated duration of time for stored
electrical energy to dissipate.
Refer to the operating instructions shipped with the unit,
and available online for:
•
Discharge time.
•
Detailed safety instructions and warnings.
Strict adherence to safety precautions and notices is
mandatory for safe operation of the frequency converter.
Introduction
VLT
®
Midi Drive FC 280
10 Danfoss A/S © 03/2016 All rights reserved. MG07B102
11
To Next Page
Loading...
Need help?
General