Datakom DK-45 - Page 44

DK-45 Kullanım Kılavuzu V1.0 (22.09.2016)
- 44 -
ICON and No:
DESCRIPTION
ADJUSTMENT LIMITS
Factory
Set
E.31
SERVICE D TIME :
Service D period
(Change oil)
0 ... 32767
If this parameter is set to 0 then service D
warning will not be given.
10000
hours
E.32
SERVICE E TIME :
Service E period (Check
compresssor)
0 ... 32767
If this parameter is set to 0 then service E
warning will not be given.
20000
hours
E.33
DISP 2.TEMP PRS :
Display second
temperature and
pressure values
0: No
1: Yes
1
E.34
FAN ON TEMP. :
Fan turn-on temperature
30 ... (E.09-2)
Please see chapter 9 for details.
85 °C
E.35
FAN OFF TEMP. :
Fan turn-off differential
temperature
5 ... 15
Please see chapter 9 for details.
5 °C
E.36
FLASH OFF TIME :
Flashing relay off timer
0 ... 999
Please see chapter 9 for details.
2 sec
E.37
FLASH ON TIME :
Flashing relay on timer
0 ... 11999
Please see chapter 9 for details.
3 sec
E.38
PRVNT PRES.LOSS :
Pressure loss
prevention method
0: Standard operation
1: Increase/decrease after each cycle.
2: Calculation through pressure slope
Please see chapter 6.5 for details.
0
E.39
SLV.MAX RN TIME :
Slave compressor
maximum run time (multi
compressor)
0 … 65535
0 minute