INTRODUCTION
17
2
ID-NET™ M/S Multidata: Multiple stations – single scanner
CBX100
CBX100
CBX100
ID-NET™ interface allows connection of scanners reading objects placed on independent
conveyors. All scanners are typically located far away from each other and they use a
dedicated presence sensor.
At the end of each reading phase, each scanner transmits its own data message to the host.
Thanks to ID-NET™, data collection among readers is accomplished at a high speed without
the need of external multiplexing device. This leads to an overall cost reduction and to a
simple system wiring.
To Next Page
Loading...
