KYMAN™
3
Windows Mobile Bluetooth® Manager Device Setup
Before turning on Bluetooth®, ensure that the two devices are within close range and
that both Bluetooth®-enabled devices are discoverable.
1. Tap Start -> Settings -> Connections tab.
2. Tap Bluetooth > Mode
3. Select or clear the “Turn on Bluetooth” check box:
NOTE
By default, Bluetooth® is turned off. If you turn it on, and then turn off
your device, Bluetooth® also turns off. When you turn on your device
again, Bluetooth® turns on automatically.
To create a Bluetooth® partnership between your device and another device that has
Bluetooth® capabilities, ensure that the two devices are turned on, discoverable, and
within close range.
1. Tap Start -> Settings -> Connections tab.
2. Tap Bluetooth -> Devices tab -> Add new devices. Your device searches for
other devices with Bluetooth® capabilities, and displays them in the list:
68
To Next Page
Loading...
