Software Configuration
120
Matrix 120
Reader Configuration
For an example of Matrix device configuration see the example in Chapter 1,
Steps 5-6.
When all the configuration parameters are set correctly and saved to the device,
you can perform a Backup to File and/or to an External storage device (BM100,
etc.). See
Backup and Restore Through DL.CODE.
NOTE
Especially for lengthy configurations, it is always good practice to periodically save
the configuration to permanent memory (Save on Device) to avoid losing the configu-
ration in Temporary Memory. You must give a name to the new configuration or over-
write an existing one (except for Default which cannot be modified).
NOTE
An improvement in the Matrix N Family readers allows them to contain several con-
figurations or jobs in permanent memory.
This means that in addition to your application configuration(s), the Default configu-
ration is always present on the reader and in fact it is not modifiable and cannot be
deleted.
To Next Page
Loading...
