Indicator and Keypad Button
Product Reference Guide 33
Indicator and Keypad Button
Figure 15 - Indicators
The following LED indicators are located on the reader:
In normal operating mode the colors and meaning of the five LEDs are illustrated
in the following table:
* When connected to a Fieldbus network through the CBX500, the COM LED is always
active, even in the absence of data transmission, because of polling activity on the
Fieldbus network.
During the reader startup (reset or restart phase), these five LEDs blink for one
second.
PWR
blue LED indicates that the reader is connected to the
power supply (
Figure 15 -, 1)
NET
yellow LED indicates connection to the on-board
Ethernet network (
Figure 15 -, 2)
READY
green LED indicates that the reader is ready to
operate (
Figure 15 -, 3)
GOOD green LED confirms successful reading (Figure 15 -, 4)
TRIGGER
yellow LED indicates the status of the reading phase
(
Figure 15 -, 5)
COM
yellow LED indicates active communication on the
main serial port * (
Figure 15 -, 6)
STATUS red LED indicates a NO READ result (Figure 15 -, 7)
To Next Page
Loading...
