X-PRESS Human Machine Interface
Product Reference Guide 35
X-PRESS Functions
Quick access to the following functions is provided by an easy procedure using
the push button:
1. Press the button (the Status LED will give a visual feedback).
2. Hold the button until the specific function LED is on (Test, Focus/Aim, Setup
or Learn).
3. Release the button to enter the specific function.
Once button is pressed, the cycle of LEDs activation is as follows:
Release button
Release button
to Exit
to enter Setup Mode to enter Learn Mode
Release button Release button
Release button Release button
to enter Focus/Aim Modeto enter Test Mode
(cycle)
to Exit
To Next Page
Loading...
