Datalogic Matrix 120 - CAB-1011 Cable for Opto-Isolated I;O Connections

Alternative Connections
164 Matrix 120
CAB-1011 cable for opto-isolated I/O connections
The CAB-1011 accessory cable provides opto-isolated input/output signals
between the Matrix 120 reader and the I/O devices.
Figure 81 - 25-pin D-Sub Male COM, I/O and Power Connector
CAB-1011 Connector Pinout
Pin Name Description
1 CHASSIS Cable shield connected to chassis
9, 13 Vdc Power Supply Input Voltage +
7, 25 GND Power Supply Input Voltage -
18 I1A External Trigger (polarity insensitive)
19 I1B External Trigger (polarity insensitive)
6 I2A Input Signal 2 (polarity insensitive)
10 I2B Input Signal 2 (polarity insensitive)
8 O1+ Configurable Digital Output 1 - positive pin
22 O1- Configurable Digital Output 1 - negative pin
11 O2+ Configurable Digital Output 2 - positive pin
12 O2- Configurable Digital Output 2 - negative pin
2 TX+ Transmitted data (+)
3 RX+ Received data (+)
4 TX- Transmitted data (-) (RS422 only)
5 RX- Received data (-) (RS422 only)
14, 16 - Reserved
15, 17, 20
NC Not Connected
21, 23, 24