Image Ship - IMGSHP
Product Reference Guide 7-5
E - Edge Sharpen: Causes the transmitted image to be convolved with
an edge sharpening filter. Entering a 23E gives the sharpest edges, but
also increases noise in the image.
0E Don’t sharpen image (default)
14E Apply edge sharpen for typical image
ne Apply edge sharpen using strength n (n = 1-24)
F - File Format: Indicates the desired format for the image.
0F KIM format
1F TIFF binary
2F TIFF binary group 4, compressed
3F TIFF grayscale
4F Uncompressed binary (upper left to lower right, 1 pixel/bit, 0 pad-
ded end of line)
5F Uncompressed grayscale (upper left to lower right, bitmap format)
6F JPEG image (default)
8F BMP format (lower right to upper left, uncompressed)
H - Histogram Stretch: Increases the contrast of the transmitted image.
Not available with some image formats.
0H No stretch (default)
1H Histogram stretch
I - Invert Image: Used to rotate the image around the X or Y axis in
fixed mount applications where the imager is mounted upside down.
1 IXInvert around the X axis (flips picture upside down)
1 IYInvert around the Y axis (flips picture left to right)
To Next Page
Loading...
Need help?
General
