To Next Page

To Previous Page

Utilities

9-4 PowerScan

7000 2D

Temporary Configuration Using Configura-

tor

For quick download communication configuration, scan the appropriate

Power Image Configurator bar code for your interface below to tempo-

rarily configure the imager for Power Image Configurator settings.

Installing Power Image Configurator from

the Web

1. Access the web site at the address shown on the back cover of this

manual and select the language option for your country.

2. Select “Software Updates” from the Quick Links menu on the

home page.

3. Locate PowerScan Imager in the Product column.

4. Click on the link “Power Image Configurator.”

5. When prompted, select Save File, and save the files to a location on

your computer.

6. Once you have finished downloading the file, exit the web site.

7. Using Explorer, locate your saved file.

NOTE

If you download new software into a unit, the

user-programmed parameters are retained. If

you need to discard user-programmed settings,

see Resetting the Standard Product

Defaults on page 9-2

Power Image Configurator

for RS-232

Power Image Configurator

for USB

Datalogic PowerScan 7000 2D Product Reference Guide

Other manuals for Datalogic PowerScan 7000 2D