Datalogic PowerScan 7000 2D - EanJan-8

Symbologies
6-26 PowerScan
®
7000 2D
EAN/JAN-8
<Default All EAN/JAN-8 Settings>
EAN/JAN-8 Enable
EAN/JAN-8 Check Digit Transmit
This selection allows you to specify whether the check digit should be
transmitted at the end of the scanned data or not. Default = On.
EAN/JAN-8 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-8
data.
Default = Off for both 2 Digit and 5 Digit Addenda.
* On
Off
Off
* On
* 5 Digit Addenda Off
5 Digit Addenda On
* 2 Digit Addenda Off
2 Digit Addenda On