Datalogic PowerScan 7000 2D - USB PC Keyboard or USB Macintosh Keyboard

Plug and Play
Product Reference Guide 1-7
Each bar code above also programs the following suffixes for each sym-
bology:
USB PC Keyboard or USB Macintosh Key-
board
Scan one of the following codes to program the imager for USB PC Key-
board or USB Macintosh Keyboard. Scanning these codes adds a CR
and selects the terminal ID (USB PC Keyboard - 124, USB Macintosh
Keyboard - 125).
Symbology Suffix
EAN-8 0C
EAN-13 16
UPC-A 0D
UPC-E 0A
Code 39 00 0A 0B
Interleaved 2 of 5 00 0D 0B
Code 128 00 18 0B
NOTE
The following USB “Plug and Play” codes (USB
Keyboard - PC, USB Keyboard - Mac, and USB
HID) are supported on specific imager models.
Check your model type to determine if this inter-
face applies to your unit.
USB Keyboard (PC)
USB Keyboard (Mac)