Datalogic PowerScan 7000 2D Product Reference Guide

Symbologies
6-22 PowerScan
®
7000 2D
UPC-E0 Addenda Required
When Addenda Required is set to on, the imager will only read UPC-E
bar codes that have addenda. Default = Not Required.
UPC-E0 Addenda Separator
When this feature is on, there is a space between the data from the bar
code and the data from the addenda. When turned off, there is no space.
Default = On.
UPC-E0 Check Digit Transmit
Check Digit specifies whether the check digit should be transmitted at
the end of the scanned data or not. Default = On.
* Not Required
Required
Off
* On
Off
* On

Datalogic PowerScan 7000 2D Specifications

General

Brand	Datalogic
Model	PowerScan 7000 2D
Category	Barcode Reader
Language	English