EasyManuals Logo

Datalogic PowerScan M8300 User Manual

Datalogic PowerScan M8300
245 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #164 background imageLoading...
Page #164 background image
Enter Configuration
Exit and Save Configuration
Ì$+;Î
16-KEY DK MODEL PARAMETERS
Ì$-?Î
155
QTY/CODE MODE
When the scanner is in Quantity-Code Mode, the operator is prompted with two data fields
named QTY= and CODE= . The normal position of the cursor is in the QTY field; the
operator is required to type the quantity on the keypad, then press the "enter key" to move the
cursor to the CODE field. Data in the CODE field can either be entered manually from the
keypad or read through the scanner.
The pair quantity and code are then transmitted to the host in a single string with configurable
header, terminators and separator. Use the commands in the following sections to define the
configuration parameters.
QTY FIELD
This feature defines the behavior of the scanner if no data is entered in the QTY field so it is left
empty. Options are:
code is transmitted with default QTY (‘1’)
code is transmitted alone (without any quantity information)
code is discarded and an error beep is generated
Transmit code with
default QTY (1)
Transmit code alone
(without any quantity
information)
Discard barcode,
generate error beep

Table of Contents

Other manuals for Datalogic PowerScan M8300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic PowerScan M8300 and is the answer not in the manual?

Datalogic PowerScan M8300 Specifications

General IconGeneral
Scanner type1D
Maximum range30 m
Read rate (max)40 reads/s
Yaw reading angle-60 - 60 °
Decoding standardsGS1 DataBar, Code 16K, Code 49, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional
Tilt reading angle-20 - 20 °
Pitch reading angle-55 - 55 °
Operating time240 min
Dimensions (WxDxH)114 x 69 x 210 mm
BluetoothNo
Operating frequency910 MHz
Input voltage10 - 30 V
Battery capacity2150 mAh
Power requirements0.33 - 1A
Number of reads per charge60000
CertificationIP64, China RoHS, EU RoHS, CDRH Class II, IEC 60825-1 Class 2
Keys quantity3 keys
Product colorBlack, Yellow
LED indicatorsCharging, Power
Display resolution32 x 96 pixels
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)-20 - 50 °C
Operating relative humidity (H-H)0 - 90 %
Weight and Dimensions IconWeight and Dimensions
Weight393 g

Related product manuals