Datalogic PowerScan M8300 User Manual

Enter Configuration
Exit and Save Configuration
Ì$+;Î
16-KEY DK MODEL PARAMETERS
Ì$-?Î
154
OPERATIVE MODE
MODE SELECTION
This feature allows the PowerScan PM8300-DK to operate in one of two basic operative modes:
• SDIM (Simple Data Input Mode) — data entered, either on the keypad or read via
barcode, is transmitted the host once the enter key is pressed, following the
formatting rules described in the previous paragraph.
• QTY/CODE (Quantity/Code Mode) — Refer to the next section, QTY/CODE MODE
PARAMETERS.

Simple Data Input
Mode
Quantity/Code Mode
ENTER KEY CONFIGURATION
This command is active only when the scanner is in Simple Data Input Mode. It defines the
behavior of the enter key when no data has been previously entered. By default an error sound
is generated; it can also be configured to transmit a "null" character.

Generate error sound
send null char
Bg2

Datalogic PowerScan M8300 Specifications

General

Scanner type	1D
Maximum range	30 m
Read rate (max)	40 reads/s
Yaw reading angle	-60 - 60 °
Decoding standards	GS1 DataBar, Code 16K, Code 49, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional
Tilt reading angle	-20 - 20 °
Pitch reading angle	-55 - 55 °
Operating time	240 min
Dimensions (WxDxH)	114 x 69 x 210 mm
Bluetooth	No
Operating frequency	910 MHz
Input voltage	10 - 30 V
Battery capacity	2150 mAh
Power requirements	0.33 - 1A
Number of reads per charge	60000
Certification	IP64, China RoHS, EU RoHS, CDRH Class II, IEC 60825-1 Class 2
Keys quantity	3 keys
Product color	Black, Yellow
LED indicators	Charging, Power
Display resolution	32 x 96 pixels
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 90 %

Weight and Dimensions

Weight	393 g