Datalogic QuickScan QS6500

Symbologies
6-156 QuickScan
®
QS6500/QS6500 BT
Telepen
The following options apply to the Telepen symbology.
Disable/Enable Telepen
When this feature is disabled, the imager will not read Telepen bar codes.
Checksum Verification
When enabled, the imager will verify the check sum of the labels.
Checksum Transmit
When this option is enabled, the imager will transmit the checksum.
Format
The Telepen symbology contains options for numeric only or full
ASCII.