Datalogic QuickScan QS6500

General Features
3-8 QuickScan
®
QS6500/QS6500BT
Good Read Beep Control
This feature enables/disables the imager’s ability to beep upon a success-
ful decode of a label.
Good Read Beep Frequency
Adjusts the good read beep to sound at a selectable low, medium or high
frequency, selectable from the list below. (Controls the beeper’s pitch/
tone.)
START
STATE BARCODE
Disable
Enable
END
START
FREQUENCY BARCODE
2000 Hz
2100 Hz
2200 Hz
2300 Hz
2400 Hz