Datalogic QuickScan QS6500

Product Reference Guide E-1
Appendix E
List Commands
Parameter Settings List
The following bar codes are used to cause the scanner to display (list) its
internal data at a connected terminal.
List Standard Parameter
Settings
Displays the current configu-
ration of your scanner.
List Unique Parameter
Settings
Displays any unique parame-
ter settings currently pro-
grammed into your scanner.
List String Settings
Displays any data string set-
tings currently programmed
for your scanner.
List Firmware Version
Displays the scanner’s firm-
ware version.
List Default Parameter
Version
Displays the version descrip-
tion for the scanner’s factory-
programmed default parame-
ters.
List Serial Number
Displays the scanner’s serial
number.