Datalogic QuickScan QS6500

Interface Features
Product Reference Guide 4-17
• Enable for label transmission — the imager expects an ACK/NAK
response from the host when a label is sent
• Enable for host-command acknowledge — the imager will
respond with ACK/NAK when the host sends a command
• Enable for label transmission and host-command acknowledge
START
STATE BARCODE
Disable Beep
on ASCII BEL
Enable Beep on
ASCII BEL
Disable Beep
on Not On File
Enable Beep
on Not On File
Disable ACK
NAK
Enable ACK
NAK for
Transmission
Enable ACK
NAK for host-
command
acknowledge
Enable ACK
NAK for trans-
mission and
host-command
END