Datalogic QuickScan QS6500 User Manual

Interface Related Features
4-32 QuickScan
®
QS6500/QS6500 BT
Keyboard Wedge/USB Keyboard — cont.
Wedge Quiet Interval
Quiet Interval is the amount of time to look for keyboard activity before
the imager breaks the keyboard connection in order to transmit data to
the host..
NOTE
This feature does not apply to the USB Keyboard
interface.
START
MODE BARCODE
Selectable from 00 (no interval) to 255 in 10 msec
increments. Use hexidecimal (range: 00 to FF hexidec-
imal) to set the interval. To configure this feature, scan
the “START” bar code above to place the unit in Pro-
gramming Mode, then the
Set Wedge Quiet Interval
bar code followed by the digits from the Alphanumeric
table in
Appendix B, Alpha-Numeric Pad represent-
ing your desired length. Accept your selection by scan-
ning the “SET” bar code below and finally, exit
programming mode by scanning the “END” barcode
below
DEFAULT SETTING FOR THIS FEATURE:
01 (10 msec)
Set Wedge
Quiet Interval
SET
END

Datalogic QuickScan QS6500 Specifications

General

Scan speed	450 sec/page
Tilt angle range	-60 - 60 °
Maximum scan area	610 mm
Decoding standards	- 1D - Code 16K - EAN/JAN - GS1 DataBar - PDF Models - GS1 DataBar Expanded Stacked - GS1 DataBar Stacked - GS1 DataBar Stacked Omnidirectional - MicroPDF417 - PDF417 - UPC A/E
Dimensions (WxDxH)	165 x 74 x 99 mm
Cable length	2.44 m
Standard interfaces	Keyboard wedge
Input voltage	4.5 - 14 V
Power consumption	300 mA
Certification	RoHS
Product color	Black
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	181.4 g