Extended System-Level Command Functions
Class Series 2 Programmer’s Manual 81
SILEX Version 1 WIFI Configuration Parameters – Identifier ‘SV1’
The ‘SV1’ WIFI sub-group contains the configuration parameters that are specific to
the SILEX Version 1 WIFI radio module used by Datamax-O’Neil. The ‘Item-Value’
pairs within the ‘SV1’ sub-group of the ‘WIFI’ sub-group are defined by the following
table:
Item
Number
Name Available
to User
(Y/N)
Value Type Description
1 Network Type Y Decimal Value that represents a Valid Network
Type for the SILEX Version 1 module.
AD-HOC = 0
Infrastructure = 1
2 Encryption Type Y Decimal Value that represents the SILEX Version
1 Encryption Types supported.
Security disabled = 0
WEP64 = 1
WEP128 = 2
WPA = 3
WPA2 = 4
3 Authentication Type Y Decimal Value that represents the SILEX Version
1 Authentication Types supported (Auto,
Open, Pre-Shared Key, EAP, etc.).
Open System = 0
Shared Key = 1
Pre-Shared Key = 2
TTLS = 3
LEAP = 4
PEAP = 5
EAP-FAST = 6
TLS = 7
4 Inner
Authentication Type
Y Decimal Value that represents the Inner
Authentication Type used if a Tunneled
EAP method is specified.
None = 0
PAP = 1
MSCHAP_V2 = 2
5 Use WPA Group Key Y Boolean Enables or Disables use of the WPA
Group Key.
To Next Page
Loading...
