Datasat AP20 - Page 43

AP20 Installation and Operating Guide Page 43
AP20 Installation & Operating Guide Document # 9301H39200 Ver. 1.25
Figure 21. Parametric EQ Screen, Filter Enabled
2.12 Copy EQ Set to Another EQ Set
This screen is used to copy the EQ settings for all channels to a new EQ set under a new name. After
equalizing all the channels, copy these settings to create another EQ (with a new name).
Menu (System) > Formats > Audio EQ Setup > Edit EQs
Figure 22. Copy EQ Settings
Use the Copy EQ function, accessible from the Edit EQs menu to copy the EQ set. Select the Copy
EQ From set (select from the pulldown), then in the to new EQ field, enter a new name for the EQ set,
then click the Copy button.