Datasat AP20 - How-To Procedures for Setup; Setup Procedures Cross-Reference

AP20 Installation and Operating Guide Page 45
AP20 Installation & Operating Guide Document # 9301H39200 Ver. 1.25
 The overall sound level is comfortable and balanced.
 The soundtrack quality is excellent and does not include extraneous noise.
 The dialog is in sync with the picture being projected.
 The surround speakers are heard at the correct level. (Please note that not all scenes will
have surround material.)
To adjust the overall sound level in the theater, adjust the main fader on the audio processor.
3.0 How-To Procedures for Setup
This table provides a list of setup activities and provides instructions or a link to instructions elsewhere
in this manual.
Table 10. Setup Procedures
ACTIVITY INSTRUCTIONS
Assign a Format button See 4.3.4 Assign Format Buttons, page 66.
Unassign / delete a Format
button
See 4.3.4 Assign Format Buttons, page 66 – select the button
and assign a “blank” format to it.
Configure power-on Format
(Startup Format)
See 4.3.2 Startup Format, page 65.
Assign fader level to a Format
or set global fader for all
Formats
See 4.2 System Setup Screen, page 53 “Fader Control”, and see
4.2.1 Assign Fader Level to a Format, page 54.
Create a Format See 3.1 Example: Creating a Format, below.
For detailed information about Formats, see 2.7 About Formats,
pag
e 29.
Assign Channel Names and Vu
meters
See 4.3.8.3 Channel Names, page 87.
Set Non-sync Level and Non-
sync Routing
See 4.3.6.3 NonSync Level and Routing, page 73.
See also 4.2.1 Assign Fader Level to a Format, page 55.
USB Save / Restore / Load See 4.2.3 Saving and Restoring Configuration Files, page 58.
Load a personalized screen
saver
See 4.2.3 Saving and Restoring Configuration Files, page 58. To
set screensaver time and mode, see 4.2 System Setup Screen,
pag
e 53.
Set up Global Audio Delay for a
format
See 4.3.6.1 Global Delay, page 70.
Set up Multiple Surround
Channels
For digital cinema format, see 4.3.6.2 Extended Surround
Options, page 72.
Set up HDMI option For digital cinema format, see HDMI Options, page 77
View AP20 System information See 4.2.6 System Info, page 63.
Update AP20 software See 4.2.2 Updating Your AP20 Software, page 56.