DayTronic System 10 - Page 38

A - 4
PHYSICAL LAYOUT
Power ON/OFF
Switch
Fuse
AC Power
Connector
Voltage
Selector Switch
Plug-In Keyboard
Connector
Interface
Protocol
Switches
Computer Interface
Connector
"A Card" I/O Connectors
(for connection of transducers
and control I/O)
EEPROM Write
Protect Switch
Panel-Mount
Slide




EEPROM Write
Protect Switch
Actuating Lever
"A SLOT" No. 20
System Status
Indicators
LCD / VFD Connector
(
Model 10K2C / 10K2D only)
Optional "A Cards"
Central Processor/Interface Card
(Interface Protocol Switches are mounted on this board)
Snap-On
Front Bezel
Post
"A SLOT" No. 1
Plug-In Keyboard
Connector
Front-Panel Large-Scale
LCD / VFD Display
(Model 10K2C / 10K2D only)
Larger cutout on 10K1C
and 10K2C only
Power ON/OFF
Switch
Fuse
AC Power
Connector
Voltage
Selector
Switch
Computer Interface
Connector
"A Card" I/O Connectors
(for connection of transducers and control I/O)



Removable "A Slot" Connector Cover
Fig. 2.1.b “10KU”
Mainframe Rear Elements
Fig. 2.2.a “10K1/10K2” Mainframe Front Elements
Fig. 2.2.b
“10K1/10K2”
Mainframe
Rear Elements
“O NTHE A IR ” (A-S IZED )