DEC 600s - Before You Begin

Before You Begin
Before You Begin
i
What You
Should Have
Done Already
Before you start up your workstation or server system, you
should have already completed the following tasks:
• The installation tasks described in Chapter 3 or Chapter 4.
• The network connection steps described in Chapter 5 if your
system is to be networked.
If you have not performed these tasks, do so now.
What You
Should Know
Beforehand
The tasks in this chapter require some experience with computer
tasks such as entering console commands and responding to
questions that appear on-screen during the factory-installed
software procedures.
Factory-Installed
Software
Preconfigured workstation and server systems with an internal
fixed disk drive include a factory-installed operating system.
6–2 Starting Up Your System