Shutting Down the System
Step 2:
Turn Off the
Hardware
After shutting down the operating system software, you can
turn off the hardware by completing the following steps. Server
systems may not have a monitor.
1. Turn off (O) the system unit by pressing the On/Off switch,
Figure 7–1.
2. Turn off (O) all expansion boxes.
3. Turn off (O) all peripheral devices (such as printers and
modems).
4. Turn off (O) the monitor.
Figure 7–1 Turning Off the System Unit
MLO-008607
ISDN
S3
2
1
0
7–4 Turning Off Your System
To Next Page
Loading...