Connecting the Workstation
Figure 3–11 Connecting a Modem
MLO-009388
ISDN
S3
2
1
0
Step 13: Printer
Consult the documentation that came with the printer to unpack
it and set the baud rate. Most types of printers can be connected
to the alternate console/printer port on the back of the system
unit, as shown in Figure 3–12.
Many printers, including third-party plotters, can be used with
your system. See your Digital sales representative for a list of
the recommended printers.
Installing a Workstation System 3–17
To Next Page
Loading...