A Closer Look at Your System
Table 2–5 Back of the System Unit
Feature Function
!
,
"
, and
#
TURBOchannel slots
0, 1 and 2
In this diagram, TURBOchannel slot 0
contains a graphics option.
$
Auxiliary power
socket
To connect the monitor power cord so the
monitor will not require a connection to a
separate power outlet.
%
System power
socket
To connect the system unit power cord.
&
10BASE-T port To connect a 10BASE-T Ethernet network
cable.
'
Halt button To place the system in console mode.
(
AUI Ethernet
network port
To connect an AUI Ethernet network cable
(sometimes referred to as standard or
Thickwire Ethernet).
)
ISDN port Functionality currently not supported.
+>
Audio port To connect the audio input and output adapter.
+?
Alternate console
switch
Toggle switch to redirect console output from
a monitor (switch up) to an alternate console
such as a terminal (switch down).
+@
Alternate console/
printer port
To connect a terminal as an alternate console,
or a printer.
+A
Diagnostic display
lights
Used for diagnostic testing purposes.
+B
Keyboard/mouse
port
To connect the keyboard/mouse extension
cable.
+C
Synchronous
/asynchronous
communications port
To connect a communications device such as a
printer, plotter, modem, or console terminal.
+D
SCSI port To connect Small Computer System Interface
(SCSI) peripheral devices. Either SCSI-1 or
SCSI-2 devices can be connected.
+E
Power On/Off
switch
To turn the system unit power on (|) and off
(O).
Preparing to Install Your System 2–13
To Next Page
Loading...