Unpacking a Workstation System
Unpacking a Workstation System
Checking the
Box Contents
Your workstation arrives in two boxes, one for the system unit
and accessories, the other for the monitor.
Before installing your system, check to see that you have all
of the parts shown in Figure 2–3. The parts shown are for
preconfigured systems. If you did not order a preconfigured
system, check your contents list to make sure that what you
ordered has arrived in your shipment.
If Parts Are
Missing
If you are missing any parts for your workstation, contact your
Digital sales representative immediately.
WARNING:
Two People
Required
The system unit and the monitor shipped with your system are
both quite heavy. Digital recommends that two people remove
these items from the shipping boxes, as indicated on the shipping
cartons.
2–6 Preparing to Install Your System
To Next Page
Loading...
