Need help?Do you have a question about the Deep Sea Electronics Plc DSE5110 and is the answer not in the manual?
General| Brand | Deep Sea Electronics Plc |
|---|---|
| Model | DSE5110 |
| Category | Control Unit |
| Language | English |
Detailed sequence for starting and running the generator in automatic mode.
Procedure for manually controlling generator start and run functions.
Non-critical alarms to alert operators to undesirable conditions.
Critical alarms that stop the generator, requiring fault clearance.
Examples of LCD screens for instruments, alarms, and user-defined items.
Breakdown of the LCD screen sections for values, units, and icons.
How to manually scroll and view different operating parameters on the LCD.
Explanation of common alarm and user-configurable LCD indicators.
Details the function of the Stop/Reset, Manual, Auto, and Start push buttons.
Instructions for accessing and navigating the event log viewer.
Illustrative examples of how shutdown events are displayed.
Steps to enter the configuration mode on the front panel.
How to adjust timers and trip levels via the front panel editor.
How to select options from lists for parameters like input/output settings.
List of timers and analogue settings with default and maximum values.
Details configurable parameters with selectable list options.
Lists configurable output functions and their default settings.
Details configurable options for LCD indicators on the front panel.
Lists configurable input functions and their default settings.
Specifies the required dimensions for the panel cut-out for module mounting.
Guidance on ensuring adequate cooling and operating temperature.
Details the physical dimensions of the DSE 5110 module.
Diagram illustrating the layout of controls and indicators on the front panel.
Diagram showing the layout of connectors and ports on the rear panel.
Provides pin assignments and cable sizes for main connectors.
Explains the function of each pin within the module's connectors.
Information on ordering replacement or additional connector plugs.
Essential checks to perform before initial system start-up.
Details the function of each push button on the module.
Explains status indicators and units displayed on the LCD.
Lists and describes the icons used for various alarm conditions.
Wiring configurations for different AC system types.
Guidance on correctly wiring oil pressure and coolant temperature senders.
Guidance on selecting CTs based on VA burden and cable length.
Information on increasing monitored inputs with external devices.
Using the 5110 with mains monitoring for automatic start-up.
Information on upgrading to a 5220 controller for integrated mains failure.
Details the configuration editor for the original version of the 5110 module.
Details the configuration editor for the MK2 5110 V3 module.
To Next Page
