DSE Model 5110 Automatic Start Engine Management Instrumentation System
Part No. 057-009 5110 Operating Manual Issue 3.3 3/1/2006 5
1 INTRODUCTION
The DSE 5110 autostart module has been designed to allow the OEM to meet increasing demand within
the industry. It has been primarily designed to allow the user to start and stop the generator. The user
also has the facility to view all the system operating parameters via the LCD display.
The DSE 5110 module monitors the engine, indicating the operational status and fault conditions
automatically shutting down the engine and giving a true first up fault condition of an engine failure by a
flashing COMMON ALARM LED. Exact failure mode information is indicated by the LCD display on the
front panel.
The powerful Microprocessor contained within the module allows for a range of complex features to be
incorporated as standard:
• Graphical Icon based LCD display (excluding the need for translations and languages).
• Engine parameter monitoring and instrumentation.
• Generator Voltage, Frequency & Current instrumentation.
• Fully configurable inputs for use as alarms or a range of different functions.
• Extensive range of output functions using built in relay outputs.
• ‘Front panel’ configuration of operating parameters.
• PC configurable using 5xxx configuration software for Windows™ and P810 interface module.
The module is housed in a robust plastic case for front panel mounting. Connections to the module are
via locking plug and sockets.
To Next Page
Loading...
Need help?
General
