DSE Model 5110 Automatic Start Engine Management Instrumentation System
Part No. 057-009 5110 Operating Manual Issue 3.3 3/1/2006 21
8 EVENT LOG
Model 5110 features an integral 20 item event log. This log contains the last 20 shutdown alarms
registered by the controller.
8.1 ENTERING EVENT LOG VIEWER
NOTE:- Entering the event log will place the module into STOP mode, shutting down the engine if
it is already running. Additionally, all module LEDs are extinguished.
Press and hold the STOP button for five
seconds to enter the event log viewer
Timer symbol to indicate event log mode
The latest shutdown event is displayed.
Pressing the scroll
button will cycle
through the events, returning to the first one,
once the end of the list is reached.
Event number
Indication of shutdown
alarm logged (eg.
emergency stop)
Press the STOP
button at any time to
exit the event log viewer.
Engine hours
Counter at the time of the logged
shutdown alarm (eg 12.2 hrs)
If no shutdown event is logged, the display will indicate "---“ in place of
the hours counter.
8.2 EVENT LOG EXAMPLES
5
To Next Page
Loading...
Need help?
General
