Need help?Do you have a question about the Deep Sea Electronics Plc DSE8660 MKII and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Storage Temperature Range | -40 °C to +85 °C |
| Analog Inputs | 4 |
| Input Voltage | 8-35 V DC |
| Operating Temperature | -20°C to +70°C |
| Communication Ports | RS232, RS485 |
| DC Supply | 8-35 V DC |
| Protection | Reverse polarity |
Defines voltage, current, and power consumption specifications for the module.
Details parameters for AC voltage and frequency measurement.
Specifies parameters for AC current measurement, including CT ratings.
Provides an overview of rear panel connectors and terminal functions for user connections.
Details specific pin assignments and connection descriptions for DC supply and outputs.
Explains the automatic operation mode, including start requests and sequences.
Details the types of alarms, how they are displayed, and how to silence them.
Covers electrical trip alarms, their latching nature, and reset procedures.
Describes alarms related to mains decoupling, like ROCOF or Vector Shift, and their reset.
Lists essential checks to perform before starting the system for commissioning.
Outlines the mandatory four steps for successful synchronisation and load sharing.
Describes checks to ensure correct wiring and synchronization for breaker closures.
To Next Page
