6.2 INDICATIONS
Indications are non-critical and often status conditions. They do not appear on the LCD of the module
as a text message. However, an output or LED indicator is configured to draw the operator’s attention
to the event.
Example
• Input configured for indication.
• The LCD text does not appear
on the module display but can
be added in the configuration to
remind the system designer
what the input is used for.
• As the input is configured to
Indication there is no alarm
generated.
• LED Indicator to make LED1
illuminate when Digital Input A is
active.
• The Insert Card Text allows the
system designer to print an
insert card detailing the LED
function.
• Sample showing operation of
the LED.
To Next Page
Loading...
