4.2.3 BUS
Contains electrical values of the bus, measured or derived from the module’s (that controls the
generator bus switch) voltage input and MSC link.
Press the Instrumentation Scroll buttons scroll through the Bus parameters.
• Bus Voltage (ph-N)
• Bus Voltage (ph-ph)
• Bus Frequency
• Bus Total Load % (kW)
• Bus Total Load % (kVAr)
• Sequence Voltage (Zero, Positive, Negative)
• Voltage Asymmetry
• Bus Phase Sequence
• Commissioning Page 1
• Commissioning Page 2
• Commissioning Page 3
• Commissioning Page 4
To Next Page
Loading...
