Deep Sea Electronics Plc DSE8660 MKII

Operation
057-259 ISSUE: 1 Page 90 of 146
5 OPERATION
NOTE: The following descriptions detail the sequences followed by a module containing
the standard ‘factory configuration’. Always refer to your configuration source for the exact
sequences and timers observed by any particular module in the field.
5.1 QUICKSTART GUIDE
This section provides a quick start guide to the module’s operation.
5.1.1 STARTING THE GENERATOR(S)
NOTE: For further details, see the section entitled Operation elsewhere in this document.
...followed by
the Start button
Press the Manual
Mode button...