5.8 MSC COMPATIBILITY MODE
NOTE: These settings enable the interface between the DSE86xx MKII controllers and the
legacy DSE55xx and DSE75xx controllers.
MSC Compatibility
NOTE: The DSE5560 and DSE7560 are not compatible
with the DSE8660 MKII, only one type of DSExx60 can be
connected on the MSC at any time (DSE5560/DSE7560 OR
DSE8660 MKII).
= The DSE86xx MKII is not be able to communicate with the
DSE55xx and DSE75xx series modules on the MSC Link.
= Communication between DSE86xx MKII and
DSE55xx/DSE75xx is enabled. The maximum number of
DSExx10 controllers is reduced to 16 and the maximum number
of DSExx60 controllers is reduced to 8.
To Next Page
Loading...
