4.2.2 MAINS
Contains electrical values of the mains (utility), measured or derived from the module’s (that controls
the mains (utility) switch) voltage and current inputs.
Press the Instrumentation Scroll buttons scroll through the Mains parameters.
• Mains Voltage (ph-N)
• Mains Voltage (ph-ph)
• Mains Frequency
• Mains Current
• Mains Load (kW)
• Mains Total Load % (kW)
• Mains Load (kV A)
• Mains Total Load % (kV A)
• Mains Power Factor
• Mains Average Power Factor
• Mains Load (kV Ar)
• Mains Total Load % (kV Ar)
• Mains Load (kW h, kV A h, kV Ar h)
• Mains Phase Sequence
• Mains Config
• ROCOF (ROCOF & Vector Shift)
• Sequence Voltage (Zero, Positive, Negative)
• Voltage Asymmetry
• Syncrhoscope
• Battery Voltage
To Next Page
Loading...
