Front Panel Configuration
057-259 ISSUE: 1 Page 124 of 146
7.1.5 ADJUSTABLE PARAMETERS
Parameter as shown on display
Battery Under Voltage Warning Delay 0h 0m 0s
Battery Over Voltage Warning Delay 0h 0m 0s
Start Delay Off Load 0h 0m 0s
Start Delay On Load 0h 0m 0s
Start Delay Telemetry 0h 0m 0s
Start Delay Mains Fail 0h 0m 0s
Mains Transfer Time 0m 0s
Mains Over Zero Seq Volt Delay 0s
Mains Under Pos Seq Volt Delay 0s
Mains Over Neg Seq Volt Delay 0s
Mains Asymmetry High Delay 0s
Bus Over Zero Seq Volt Delay 0s
Bus Under Pos Seq Volt Delay 0s
Bus Over Neg Seq Volt Delay 0s
Bus Asymmetry High Delay 0s
Under Voltage Trip 0 V
Over Voltage Trip 0 V
Under Frequency Trip 0 Hz
CT Primary 0 A Power Cycle After Exit
CT Secondary 0 A Power Cycle After Exit
Mains Over Zero Seq Volt Active / Inactive
Mains Under Pos Seq Volt Active / Inactive
Mains Over Neg Seq Volt Active / Inactive
Mains Asymmetry High Active / Inactive
Start Delay On Load 0h 0m 0s
Battery Under Voltage Warning Active / Inactive
Battery Under Voltage Warning Delay 0h 0m 0s
Battery Under Voltage Warning 0 V
Battery Over Voltage Warning Active / Inactive
Battery OVer Voltage Warning Delay 0h 0m 0s
Battery Over Voltage Warning 0 V
Load Level For More Sets 0%
Load Level For Less Sets 0%
Load Ramp Rate 0%
Bus Over Zero Seq Volt Active / Inactive
Bus Under Pos Seq Volt Active / Inactive
Bus Over Neg Seq Volt Active / Inactive
Bus Asymmetry High Active / Inactive
Enable MSC Compatibility Active / Inactive
Scheduler Active / Inactive
Schedule On Load On Load / Off Load
Schedule Period Weekly, Monthly
Schedule Time & Date Selection (1-16)
Press to begin editing then or when
selecting the different parameters in the scheduler.