EasyManua.ls Logo

Deif PPM 300 - Page 42

Deif PPM 300
521 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Functions
Extension rack(s)
Network
PICUS
Modbus
Controllers connected in a ring for communication redundancy:
If there is a failure: Communication path changed within 100 milliseconds.
Authentication (other equipment cannot disrupt communication)
Password protection
Customisable permission levels
Modbus
Supports multiple Modbus protocols
Standard protocol: Modbus TCP/IP
Supports use and creation of custom protocols
Import and export Modbus protocols
Convert data units and scaling
Configure Modbus server settings
Breaker control
Synchronisation and breaker closing
Dynamic synchronisation: With slip frequency, for fast load acceptance
Static synchronisation: Phases match kept within a phase window
De-load before opening
Automatic synchronisation and de-loading
Operator-initiated synchronisation and de-loading possible
Breaker types (with configurable parameters)
Pulse breaker, Compact breaker, Continuous breaker
Breaker position detection and alarms
Advanced blackout
prevention (optional)
Run with a closed bus tie breaker during critical operations
If a genset governor or AVR fails, the bus tie breaker trips and disconnects the genset
Redundancy
True multi-master control
Busbar can have a ring connection
DEIF network ring connection
Internal communication ring connection
Controller commands and operation using the display unit, inputs, PICUS, and/or Modbus
Redundant breaker feedback on bus tie breakers and externally controlled breakers
Additional hardware/
software features
Hardware/software features: Power supply voltage measurement diode offset
Relay configuration (function, coil state)
Analogue input sensor failure (below and above range)
Analogue input pre-configured curves, plus up to 20 customisable curves
Analogue output pre-configured curves, plus up to 20 customisable curves
Display unit lamp test
Documentation
Free download at www.deif.com
Quick start guide
Data sheet
Designer's handbook
Installation instructions
Commissioning guidelines
Operator's manual
PICUS manual
DESIGNER'S HANDBOOK 4189340911K UK Page 42 of 521

Table of Contents

Other manuals for Deif PPM 300

Related product manuals