Category Specification
• Battery: No limit
Relay output
Relay type: Electromechanical
Electrical rating and UL/cUL Listed: 30 V DC and 1 A, resistive
Voltage withstand: ±36 V DC
Relay output
Relay type: Solid state
Electrical rating and UL/cUL Listed: 30 V DC and 1 A, resistive
Voltage withstand: ±36 V DC
Terminal connections
Frame ground and power supply: Terminals: Standard plug, 2.5 mm
2
Wiring: 1.5 to 2.5 mm
2
(16 to 12 AWG), multi-stranded
Other connections: Terminals: Standard plug, 2.5 mm
2
Wiring: 0.5 to 2.5 mm
2
(22 to 12 AWG), multi-stranded
Communication
connections
DEIF network: RJ45. Use an Ethernet cable that meets or exceeds the SF/UTP CAT5e
specifications. 100BASE-TX.
Torques and terminals
Display unit fixing screw clamps: 0.15 N·m (1.3 lb-in)
Connection of wiring to terminals: 0.5 N·m (4.4 lb-in)
UL/cUL Listed: Wiring must be minimum 90 °C (194 °F) copper conductors only.
Galvanic isolation Between power supply, relay groups, and network plugs: 600 V, 50 Hz for 60 s
Mounting
Panel mount, using six fixing screw clamps (included)
Minimum panel plate thickness: 2.0 mm
Maximum panel plate thickness: 5.0 mm
UL/cUL Listed: For use on a flat surface of a type 1 enclosure
UL/cUL Listed: To be installed in accordance with the NEC (US) or the CEC (Canada)
Cable organisation 4 cable tie slots for cable strain relief (4 mm (0.16 in) wide)
Size
L 235 mm × H 175 mm × D 52 mm (9.3 in × 6.9 in × 2.0 in) (outer frame)
Panel cutout: L 220 mm × H 160 mm (8.7 in × 6.3 in)
Accessory (included) Ethernet cable: Shielded patch cable SF/UTP CAT5e, 2 metres long
Weight
Display unit: 835 g (1.8 lb)
Ethernet cable: ~110 g (4 oz)
DESIGNER'S HANDBOOK 4189340911K UK Page 468 of 521
To Next Page
Loading...
