5. Tabs on the sides of the cartridge and corresponding grooves within the printer will guide the cartridge into the correct position until it locks into place
completely.
6. Close the front cover. Make sure that the cover is surely closed.
Replacing the Toner Cartridge
When the toner eventually runs out, only blank pages print when a print job or copy job are sent. In that case the incoming faxes are only saved in the
memory and not printed. At this stage, the toner cartridge needs to be replaced.
Order an extra toner cartridge so you will have it on hand when the current cartridge no longer prints satisfactorily. See "Ordering Supplies" to order toner
cartridges.
To replace the toner cartridge:
1. Open the front cover.
2. Pull the toner cartridge out.
3. Remove the new toner cartridge from its bag.
4. Remove the packing tape and thoroughly shake the cartridge from side-to-side to distribute the toner.
Save the box and the cover for shipping.
5. Holding the toner cartridge by the handle and slowly insert the cartridge into the opening in the printer.