Dell 1815dn Multifunction Mono Laser Printer User Manual

Installing Accessories
 

Precautions When Installing Printer Accessories
Disconnecting the Power Cord:
Never remove the control board while the printer is plugged in.

To avoid the possibility of an electrical shock, always disconnect the power cord when installing or removing ANY internal or external printer option.
Discharge of Static Electricity:
The control board and internal printer memory are sensitive to static electricity. Before installing or removing an internal printer memory, discharge static
electricity from your body by touching something metal on any device plugged into a grounded power source. If you walk around before finishing installation,
discharge any static electricity once again.

Installing Printer Memory

Additional printer memory is provided on a Dual In-line Memory Module (DIMM).

Your printer has 92 MB of memory. It can be expanded to 192 MB. Remove the preinstalled memory DIMM before upgrading the memory.
1. Power the printer off and unplug all cables from the printer.
2. Grab the control board cover and open it.
3. Completely open the latches on each side of the DIMM slot and remove the preinstalled memory DIMM.
Precautions When Installing Printer Accessories
Installing Printer Memory
Installing an Optional Tray 2
NOTE: Your printer supports only Dell DIMMs. Order Dell DIMMs online at www.dell.com.

Dell 1815dn Multifunction Mono Laser Printer Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet
Paper Handling	250-sheet input tray, 50-sheet multipurpose tray
Automatic Document Feeder	50-sheet
Duplex Printing	Yes
Scanner Type	Flatbed, ADF
Fax Transmission Speed	33.6 Kbps
Scan Resolution	600 x 600 dpi
Media Size	Letter, Legal, Executive, A4, A5, B5, Envelopes
Media Type	Plain paper, Envelopes, Labels, Transparencies
Operating System Compatibility	Windows, Mac, Linux
Print Speed	Up to 27 ppm (Letter, Black)