Dell 1815dn Multifunction Mono Laser Printer User Manual


Printing on Both Sides of Paper
1. When you change the print settings from your software application, access the printer properties.
2. From the Layout tab, select the paper orientation.
3. From the Double-sided Printing section, select the desired binding option.
3. Configure the poster option:
You can select the page layout from Poster<2x2>, Poster<3x3>, or Poster<4x4>. If you select Poster<2x2>, the output will be
automatically stretched to cover 4 physical pages.
Specify an overlap in millimeters or inches to make it easier to reconstruct the resulting poster.
4. Click the Paper tab and select the paper source, size and type.
5. Click OK to print the document. You can complete the poster by reconstructing the results.

Your printer prints on both sides of paper automatically.

Before printing, decide on which edge you will be binding your finished document. The binding options are:

l Long Edge, which is the conventional layout used in book binding.

l Short Edge, which is the type often used with calendars.
NOTE: Do not print on both sides of labels, transparencies, envelopes, or thick paper. Damage to the printer and paper jamming might result.
NOTE: To use the double-sided printing, you can use only the following paper size: A4, Letter, Legal and Folio.

Dell 1815dn Multifunction Mono Laser Printer Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet
Paper Handling	250-sheet input tray, 50-sheet multipurpose tray
Automatic Document Feeder	50-sheet
Duplex Printing	Yes
Scanner Type	Flatbed, ADF
Fax Transmission Speed	33.6 Kbps
Scan Resolution	600 x 600 dpi
Media Size	Letter, Legal, Executive, A4, A5, B5, Envelopes
Media Type	Plain paper, Envelopes, Labels, Transparencies
Operating System Compatibility	Windows, Mac, Linux
Print Speed	Up to 27 ppm (Letter, Black)