Dell 2355dn

102
Setting the Paper Tray
This feature allows you to select the tray and paper that you want to use for a printing job. Paper
size and paper tray are adjusted here.
Setting the Tray linking
If tray 1 and tray 2 are filled with letter size paper, when tray1 is empty and this option is On , then
the machine continues printing using the paper in tray 2.
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Tray Behavior .
4 Press the up/down arrows to select Tray Linking .
5 Press the left/right arrows to select the On you want to use.
6 Press the home icon ( ) to return to the Standby mode.
Substitute Tray
When the paper is mismatched, meaning that tray 1 is filled with the letter size paper, but the
printing job needs A4 size paper, the machine automatically starts printing with Letter sized
paper.
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Tray Behavior .
4 Press the up/down arrows to select Substitute Tray .
5 Press the left/right arrows to select Nearest Size .
6 Press the home icon ( ) to return to the Standby mode.
Setting the Default Tray
You can select the tray you want to use for printing job.
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Tray Behavior .
4 Press the up/down arrows to select Default Source .
5 Press the left/right arrows to select the paper tray you are using.
6 Press the home icon ( ) to return to the Standby mode.