94
Printing to the Output Tray (Face down)
The output tray collects printed paper face-down, in the correct order. The tray should be used for
most print jobs.
If necessary, expand the paper output extension to keep the print media from falling off the output
tray.
Printing to the Rear Door (Face up)
Using the rear door, the paper comes out of the printer face up.
Printing from the MPF to the rear door provides a straight paper path. Using the rear door might
improve the output quality with special materials.
To use the rear door:
Open the rear door by pulling it.
To Next Page
Loading...
