105
MPF
MPF can be configured to behave in
Tray Mode
or in
Bypass Mode
by setting the
Configure
MPF
menu in the operator panel.
Bypass Mode
In this mode the printer pulls the paper from MPF first unless it is closed or empty. MPF gets the
highest priority and pulls whatever media is present in the MPF.
NOTE: You can use this feature in print and copy job.
Tray Mode
In this mode the MPF is treated as another paper tray. Instead of treating MPF as first preference
paper source, printer pulls paper from the tray that matches the size and type. The first preference
goes to the default source.
NOTE: You can use this feature in print, copy, and fax job.
To Next Page
Loading...
